Step 1

Roll IGOAL out of bag onto level surface.

Tip - The crossbar will be straight and aid your enjoyment of your game on a level surface.

Step 2

Make sure net is not caught on hose or connectors.

Tip - Place the IGOAL where it is to be used - it saves time by moving later.

Step 3

Using the pump provided (and only this pump) attach to valve which is situated at the side of IGOAL (rear of cantilever on larger sizes) making sure that the valve is turned fully anti-clockwise.

Tip - The pump provided will onlt allow the IGOAL to inflate to required pressure.

Step 4

Put feet on the foot plates on either side of the pump for stability.

Tip - You do not need trainers or sports footwear for this - high heels work ok!

Step 5

Inflate for approx. 20-30 pumps (under normal circumstances) and screw the valve cap back on tight after inflation.

Tip - Long slow pumps are more effective than trying to go fast.

Step 6

Pop IGOAL up into upright position. On larger sizes it may be necessary for 2 people to carry out stage 6.

Tip - Make sure pump is not still attached to valve when popping up IGOAL into position.

Step 7

Ensure that the IGOAL is secured at all times by means of the appropriate supplied anchor system - details below.

Tip - On larger sizes the rear cantilever needs to be secured to stop IGOAL tipping forward.

Step 8

If fixing on grass - please use the ground pegs provided - attach pegs provided at front and back of both side returns. On larger sizes with cantilever - place 2 pegs overlapped over each black cantilever.

Tip - If ground is hard or stony it may be better to use the sandbags.

Step 9

If fixing on other surfaces i.e. Astroturf,concrete or inside - please use bags provided which should be fully filled with soft sand to ensure even distribution of weight - place the sandbags over both side returns. On larger sizes also place one sandbag over each black cantilever as above.

Tip - Place sandbags with ties on outside of net.

Step 10

Once in position add more air using pump provided to pressure required.

Tip - If IGOAL is in position for long periods or in hot weather it be necessary to check pressure periodically.

Step 11

After use make sure the area is clear of all obstacles and people before deflation.

Step 12

Remove all pegs or sandbags after deflation.

Step 13

To deflate the IGOAL - twist valve fully clockwise and push to release - the IGOAL will fall to the ground.

Tip - The IGOAL will fall the way it needs to be packed.

Step 14

Twist valve back anti-clockwise to prevent air going back into IGOAL.

Step 15

It is recommended that to aid packing that the pump is re-attached to the valve turned fully clockwise and pump several times to remove any residual air as above.

Tip - When all air has been removed from IGOAL you cant pump anymore - stop.

Step 16

Place IGOAL on the roll-out section of the bag.

Tip - Note point 13 - do not fold the IGOAL - arrange as the IGOAL falls to floor shuffling along roll-out section - this will help when next using the IGOAL.

Step 17

Carefully roll the IGOAL back into bag, put pump on top of the roll-out section, close top zippers first, then side zippers after any protruding parts are back inside the bag.

Tip - Don't worry - you can push and shove the IGOAL!

Step 18

There is no ongoing maintenance subject to product not being misused or handled carelessly.

Tip - Following these instructions will greatly help your future enjoyment of your IGOAL.